110ml bottle of Piezo Flush with special cleaning cartridge, syringe and instructions. Everything you need to restore print quality in an Epson small format printer. Is compatible with Epson desktop printers that use cartridges which are installed just above the print head. Use only as instructed.
This product requires moving the print head out of position and removing the ink cartridges and inserting the cleaning cartridge. A syringe full of PiezoFlush is gently pushed through the cleaning cartridge and directly into each print head. The waste ink, head gunk, and any dried ink is flushed out the print head and collected on an absorbent paper towel that the user supplies.
Works with R2000, P400, Artisan 50, Stylus Photo R260, Stylus Photo R280, Stylus Photo R380, Stylus Photo RX580, Stylus Photo RX680, Stylus Photo RX580, Stylus Photo RX595, Stylus Photo RX680, Stylus CX5000, Stylus CX6000, Stylus CX7000F, Stylus CX7400, Stylus CX7450, Stylus CX8400, Stylus CX9400, Stylus NX100, Stylus NX105, Stylus NX110, Stylus NX115, Stylus NX200, Stylus NX215, Stylus NX300, Stylus NX305, Stylus NX400, Stylus NX415, Stylus NX510, Stylus NX515, Stylus CX5000, Stylus CX6000, Stylus CX7000F, Stylus CX7400, Stylus CX7450, Stylus CX8400, Stylus CX9400, Stylus CX9475, Stylus NX510, Stylus NX515, WorkForce 310, WorkForce 315, WorkForce 500, WorkForce 600, WorkForce 610, WorkForce 615, Stylus N11, WorkForce 1100, WorkForce 30, WorkForce 40, WorkForce 310, WorkForce 315, WorkForce 500, WorkForce 600 , WorkForce 610, WorkForce 615, Stylus C120, WorkForce 1100, WorkForce 60, WorkForce 320, WorkForce 323, WorkForce 325, WorkForce 520, WorkForce 435, WorkForce 520, WorkForce 545, WorkForce 630, WorkForce 633, WorkForce 635, WorkForce 645, WorkForce 840, WorkForce 845, WorkForce WF-3520, WorkForce WF-3540, WorkForce WF-7510, WorkForce WF-7520, WorkForce WF-7010, Stylus NX125, Stylus NX127, Stylus NX130, Stylus NX230, Stylus NX330, Stylus NX430, Stylus NX420, Stylus NX530, Stylus NX625, and many others!
You get a 110ml bottle of PiezoFlush, and a syringe cleaning assembly that fits onto the ink stem of your printer model.
PiezoFlush is compatible with all aqueous dye and pigment inks. It is compatible with Epson print heads.
This particular kit will work with Epson 1400/1430, 800/1800, 1900, R2000, 2100/2200, 2400, 2880, SC-P400 and many more desktop printers. Basically, if the Epson cartridge fits right on top of the print head, and moves back and forth with the printhead while it prints, then this will work! An R3000 or a P600, though classified as a desktop printers use ink cartridges that are remotely located away from the print head.
Please note that this kit will not work with an R3000 or P600 because you can not access the ink stems on the print head on these models. There is no place to install the syringe assembly. Instead the R3000 and P600 are treated like Pro printers and you will need to install PiezoFlush filled cartridges and run an Initial Ink Charge to move the PiezoFlush from the cartridges through the long ink lines, ink filter dampers, and finally through the print head.
These printers are compatible with this kit:
- SureColor P400
- Artisan 50, 1400/1430
- Stylus Photo R260, R280, R380, 800/1800, 1900, R2000, 2100/2200, 2400, 2880
- Stylus Photo RX580, RX680, RX580, RX595, RX680
- Stylus CX5000, CX6000, CX7000F, CX7400, CX7450, CX8400, CX9400
- Stylus NX100, NX105, NX110, NX115, NX200, NX215, NX300, NX305, NX400, NX415, NX510, NX515
- Stylus CX5000, CX6000, CX7000F, CX7400, CX7450, CX8400, CX9400, CX9475
- Stylus NX510, NX515
- WorkForce 1100, 30, 40, 60, 310 320, 323, 324, 325, 435, 500, 520, 545, 600, 610, 615, 630, 633, 635, 645, 840, 845
- WorkForce WF-3520, WF-3540, WF-7010, WF-7510, WF-7520,
- Stylus NX125, NX127, NX130, NX230, NX330, NX430, NX420, NX530, NX625.
|Printer||P400 or R2880 or R2400 or R1900 or 1430 or 2100 or 2200|
|Product Type||Full Kits (everything)|
|Color Position or Shade||Flush|
Once the user has seen at least one product this snippet will be visible.