110ml bottle of Piezo Flush with special cleaning cartridge, syringe and instructions. Everything you need to restore print quality in an Epson small format printer. Is compatible with Epson desktop printers that use cartridges which are installed just above the print head. Use only as instructed.
Works with Epson Artisan printers, Epson Stylus Photo printers, Epson Stylus printers, Epson Workforce printers. Does not work with Epson Pro printers, or printers which use tanks that are not fitted to the print head such as the R3000. This product requires moving the print head out of position and removing the ink cartridges and inserting the cleaning cartridge. A syringe full of PiezoFlush is gently pushed through the cleaning cartridge and directly into each print head. The waste ink, head gunk, and any dried ink is flushed out the print head and collected on an absorbent paper towel that the user supplies.
You get a 110ml bottle of PiezoFlush, and a syringe cleaning assembly that fits onto the ink stem of your printer model.
PiezoFlush is compatible with all aqueous dye and pigment inks. It is compatible with Epson print heads.
This particular kit will work with Epson 1400/1430, 800/1800, 1900, R2000, 2100/2200, 2400, 2880, SC-P400 and many more desktop printers. Basically, if the Epson cartridge fits right on top of the print head, and moves back and forth with the printhead while it prints, then this will work! An R3000 or a P600, though classified as a desktop printers use ink cartridges that are remotely located away from the print head.
Please note that this kit will not work with an R3000 or P600 because you can not access the ink stems on the print head on these models. There is no place to install the syringe assembly. Instead the R3000 and P600 are treated like Pro printers and you will need to install PiezoFlush filled cartridges and run an Initial Ink Charge to move the PiezoFlush from the cartridges through the long ink lines, ink filter dampers, and finally through the print head.
Don't let clogs or ink build up damage your printer or ruin your expectations. Our Printer Cleaning Swabs can be used to clean the wiper blades, capping stations, and printer heads during routine and preventative maintenance.
Copyright notices: ConeColor®, EasyFill®, InkThrift®, and PiezoFlush® are Registered Trademarks of Vermont PhotoInkjet, LLC. Piezography® is a Registered Trademark of Cone Editions Press. Claria, Durabrite, Epson, and Ultrachrome are trademarks of Seiko Epson Corporation.