Piezography K7, Selenium Tone, Epson 3880 kit, 110ml
For Epson 3880 printers. Complete kit 110ml Selenium. Contains inks, cartridges. Just add a printer! Please read the Instructions tab.
Instructions & More InfoAbout Selenium Ink Cartridge Instructions Piezography Instructions How to Use Piezography
This is everything you need in one kit for printing both matte and glossy/baryta Neutral K7 prints on the Epson 3880. You get refillable carts with filling syringes, 110ml bottles of ink. You will need to supply a set of OEM chips (which can be new or be used) to install into the refillable carts. Please follow the instructions on the Instructions tab.
Piezography Selenium is one of Jon Cone's favorite ink sets. His professor at Ohio University, Arnold Gassan, encouraged Cone to study the chemistry of photography. His insistence that Cone make his own chemistry, fully understand the zone system, and become a skilled practitioner of the darkroom was very influential in Cone's later work as a development printmaker. They reconnected when Gassan very ill in his later life reqiured some help in his digital archives. Cone asked Gassan to provide the definitive short-bath Selenium toned print on his favorite Ilford fiber based paper. That print was used for the *ab values to formulate Selenium inks.
Selenium K7on Epson Exhibition Fiber
As for its final color in glossy printing, on Epson Exhibition Fiber paper it's very reminiscent of Ilford fiber based... maybe even a dead ringer. Probably hard to get any more replicant than this combination. Not to ring the bell to loud, but this may be the best possible replacement for the actual short bath, selenium-toned, fiber based silver print.
Selenium K7on JonCone Studio Type 5
On JonCone Studio Type 5, the warmth of the paper brings that warm Agfa paper back into the picture.This ink is our number one selling ink because it is so representative of darkroom printing.
Selenium K7 on JonCone Studio Type 2
This ink set is designed to be used with the Piezography media profiles and QuadTone RIP. Please see the Instructions tab for a full explanation of its use.
Selenium K7 on Hahnemuhle Photo Rag
You can expect to reach a dMax of 1.65 on matte papers such as JonCone Studio Type2 and Hahnemuhle Photo Rag. When glossy printing according to our directions you can reach dMax levels as high as 2.80. Piezography Glossy produces a finish in which you will not be able to tell where the inks end and the paper begins. When used as directed, it produces a uniform surface without any gloss differential nor bronzing.
This ink set can also produce the highest standard digital negatives with the optional PiezoDN software. Using multiple shades of black ink produces tens of thousands of more gray levels than when using color inks to produce digital negatives. You'll benefit by the same higher acuity, smoothness of tone, and shadow and highlight detail that Piezography inks give to printing. With PiezoDN software, you can expand the the dynamic range of your medium in the same way Piezography expands the dynmaic range of fine black & white printmaking.
You get a set of 80ml refillable cartridges; a set of Piezography inks including matte and glossy options; 8 filling syringes (use one for both blacks). The cartridges require a set of new or used OEM chips from new or used OEM cartridges to insert in the refillable cartridges. Check the instructions.
|Product Type||Starting Kit (everything)|
|Ink Type||Piezography Selenium|
|Color Position or Shade||Full Set|
|Gloss or Matte Compatibility||Matte and Glossy Printing|
Piezography K7 and K6 inks are compatible with both matte and glossy (including baryta) papers.
- To use with matte papers, the Matte Black shade 1 must be used.
- For printing on glossy or baryta papers, the Photo Black shade 1 must be used.
- After printing on a glossy or baryta media, a second overprint of Piezography Gloss Overprint is requried according to our instructions in order to equalize all gloss differential, bring out shadow detail, and eliminate bronzing.
Piezography inks are intended for use with Piezography .iquad curves and the QuadTone RIP when used as instructed inthe NEW Piezography Manual which can be found in our Instructions tab.
There are many different configurations of ink available according to printer model and your intended use.
If you are buying an optional HD version of an ink set it may require the purchase of Piezography Professional Edition software in order to make your own custom curves. Where this is not mandatory with the Piezography Pro HD Photo Black, it is mandatory with the Piezography Pro Ultra HD Matte Black.
Please review the detailed description to make certain you are buying a system according to your intentions and needs.