Set 7 (matte only) is a Piezography ink set for printers with at least 7 color positions where only matte printing is desired. These printers include the Epson R2200, Pro 4000, Pro 7600, and Pro 9600. The entire ink set is dedicated to matte printing. It includes the matte black shade 1, and shades 2-7.
This ink set is PiezoDN compatible. But, the Epson R2200, Pro 4000, Pro 7600, and Pro 9600 printers are not supported by PiezoDN
This set can be used in printers with 8, 9 or 11 ink channels in which only 7 ink channels are operable. In this case additional PiezoFlush should be purchased to keep non-operating print head channels from over-heating and affecting adjacent working channels. We offer a Piezography media profile re-mapping service to map out non-operating channels in printers. This allows you to use a printer with permanently clogged channels, or aquire a potentially free printer that is no longer useful to someone printing color.
Piezography Selenium is one of Jon Cone's favorite ink sets. His professor at Ohio University, Arnold Gassan, encouraged Cone to study the chemistry of photography. His insistence that Cone make his own chemistry, fully understand the zone system, and become a skilled practitioner of the darkroom was very influential in Cone's later work as a development printmaker. They reconnected when Gassan very ill in his later life reqiured some help in his digital archives. Cone asked Gassan to provide the definitive short-bath Selenium toned print on his favorite Ilford fiber based paper. That print was used for the *ab values to formulate Selenium inks.
Selenium K7on Epson Exhibition Fiber
As for its final color in glossy printing, on Epson Exhibition Fiber paper it's very reminiscent of Ilford fiber based... maybe even a dead ringer. Probably hard to get any more replicant than this combination. Not to ring the bell to loud, but this may be the best possible replacement for the actual short bath, selenium-toned, fiber based silver print.
Selenium K7on JonCone Studio Type 5
On JonCone Studio Type 5, the warmth of the paper brings that warm Agfa paper back into the picture.This ink is our number one selling ink because it is so representative of darkroom printing.
Selenium K7 on JonCone Studio Type 2
This ink set is designed to be used with the Piezography media profiles and QuadTone RIP. Please see the Instructions tab for a full explanation of its use.
Selenium K7 on Hahnemuhle Photo Rag
You can expect to reach a dMax of 1.65 on matte papers such as JonCone Studio Type2 and Hahnemuhle Photo Rag. When glossy printing according to our directions you can reach dMax levels as high as 2.80. Piezography Glossy produces a finish in which you will not be able to tell where the inks end and the paper begins. When used as directed, it produces a uniform surface without any gloss differential nor bronzing.
This ink set can also produce the highest standard digital negatives with the optional PiezoDN software. Using multiple shades of black ink produces tens of thousands of more gray levels than when using color inks to produce digital negatives. You'll benefit by the same higher acuity, smoothness of tone, and shadow and highlight detail that Piezography inks give to printing. With PiezoDN software, you can expand the the dynamic range of your medium in the same way Piezography expands the dynmaic range of fine black & white printmaking.
You get a set of eight bottles of ink including the Matte black, six additional shades of black ink, and a bottle of PiezoFlush for the "unused" eight and/or ninth positions of 8 and 9 slot printers when a glossy option is undesirable.
Piezography K7 and K6 inks are compatible with both matte and glossy (including baryta) papers.
- To use with matte papers, the Matte Black shade 1 must be used.
- For printing on glossy or baryta papers, the Photo Black shade 1 must be used.
- After printing on a glossy or baryta media, a second overprint of Piezography Gloss Overprint is requried according to our instructions in order to equalize all gloss differential, bring out shadow detail, and eliminate bronzing.
Piezography inks are intended for use with Piezography .iquad curves and the QuadTone RIP when used as instructed inthe NEW Piezography Manual which can be found in our Instructions tab.
There are many different configurations of ink available according to printer model and your intended use.
If you are buying an optional HD version of an ink set it may require the purchase of Piezography Professional Edition software in order to make your own custom curves. Where this is not mandatory with the Piezography Pro HD Photo Black, it is mandatory with the Piezography Pro Ultra HD Matte Black.
Please review the detailed description to make certain you are buying a system according to your intentions and needs.
|Printer Model||SureColor P400 or SureColor P600 or SureColor P800 or SureColor P6000 or SureColor P8000 or SureColor P7000 or SureColor P9000 or Stylus Pro 3800 or Stylus Pro 3880 or Stylus Pro 4000 or Stylus Pro 4800 or Stylus Pro 4880 or Stylus Pro 4900 or Stylus Pro 7600 or Stylus Pro 7800 or Stylus Pro 7880 or Stylus Pro 7890 or Stylus Pro 7900 or Stylus Pro 9600 or Stylus Pro 9800 or Stylus Pro 9880 or Stylus Pro 9890 or Stylus Pro 9900 or Stylus Pro 7700 or Stylus Pro 9700 or Stylus Photo R3000 or Stylus Photo R2880 or Stylus Photo R2400 or Stylus Photo R2000 or Stylus Photo R1900 or Stylus Photo R800 or Stylus Photo R1800|
|Product Type||Bottle Sets (no carts)|
|Color Position or Shade||Full Set|
|Ink Brand||Piezography Selenium|
|Gloss or Matte Compatibility||Matte Printing Only|
|Piezography Ink Set Configuration||Piezography K7 Set|
|PiezoDN Digital Negative Compatibility||Not supported by PiezoDN|
Once the user has seen at least one product this snippet will be visible.