About PiezoDN ink sets
PiezoDN ink sets are designed for use with the optional PiezoDN software profiling system. PiezoDN ink sets use Photo Black shade 1, and shades 2, 3, 4, 5, 6 + Gloss Optimizer. If you have an eighth channel available, you can also install Shade 7 and do full-tilt Piezography printing with the same printer. If you have 9 or more ink slots, you can also install Matte Black shade 1 ink for black & white printing on matte papers in addition to glossy and negative printing. On the 1430 and 1500W printers which have only 6 slots, the ink set is limited to negatives. But, by purchasing additional ink cartridges, it is possible to replace the Photo Black with Matte Black for printing on matte paper - and then swap back to Photo Black for printing film. No glossy printing is available on 6 ink printers.
If you are considering a new ink set of making PiezoDN negatives -please look for a PiezoDN compatible ink set. Please do not consider Methodology 1 & 3 ink sets which use shades 2.5 and 4.5. They will have only limited support in PiezoDN moving forward.
Finest Quality Negatives in the World
Because PiezoDN is built upon the proven ink and curve technology of Piezography, the negatives it produces are capable of making thousands upon thousands of tonal transitions. This system truly matches the tonal breadth of noble-metal arts such as Platinum and Palladium printing.
Because PiezoDN is an inkjet printed negative, you can calibrate it perfectly for any given analogue process and print different negatives on the fly, something not done with more expensive LVT film burners.
PiezoDN is Darkroom v2
We started building PiezoDN only for Palladium and Platinum printing but quickly realized it was capable of so much more. We’ve built base-line curves for Gum, Cyanotype, Salt, Ziatype, and Silver and we aren’t stopping there. Over the next few months and years we hope to build the baseline curves needed for Malde-Ware printout Platinum, gravure, and the list keeps growing! Vermont PhotoInkjet has produced highly pure Platinum and Palladium catalysts that are perfectly suited to the PiezoDN system. Look for these and other Alternative Process supplies here, including papers for hand coating, Pictorico OHP Ultra Premium film, and Kobayashi Japanese coating brushes.
.7 Point Text? Yep.
A long time ago we proved the resolution fidelity of Piezography by printing 1pt text (something not possible using normal epson ink even with today’s newest pro printers). We’ve gone a step further with PiezoDN and printed all of Alice in Wonderland at 3.5×4.5 inches in READABLE .7pt text. Of course you need a loupe to see it. The negatives that PiezoDN produces are finer than the optical resolution of Platinum/Palladium or other hand-coated print-methods even when using single-point lights and vacuum easels. PiezoDN makes true contact-worthy negatives that rival or possibly surpass traditional photo negatives when using new-generation digital cameras such as the A7rII or medium-format digital backs.
When printed on silver paper, this system far-surpasses the leading digital silver printing services in both resolution, tonal fidelity, and the ability to print in your own darkroom on your paper of choice.
1 Coat the media
2 Print the PiezoDN target on film
3 Expose and develop the target
4 Measure the target with PiezoDN software
5 You can now print screen matching negs
Calibrate In House
PiezoDN software comes packed with tools for calibrating (linearizing) your own digital negatives. Literally, you can get the same tonal separation in your DARKROOM that you can with Piezography-on-paper.
If Piezography is new to you and you wish to make digital negatives, you will need to download QuadTone RIP and QTR Print Tool (if on OS X). While you will not follow any of the instructions in the QTR manual and documentation, it is imperative that you follow the instructions in the Piezography manual. Piezography uses the QTR engine and a few of its tools. However, the media profiles for making negatives are NOT made with QTR Tools. Therefore, Piezography workflow is quite different from QTR workflow. The Piezography manual and a lot of vital information can be found here.
The following pictures were taken at Maine Media College Historical Process Lab run by Brenton Hamilton (Chair, Professional Certificate Program in Photography, Maine Media College) and joined by Roxanne Cottongame and Alan Vlach when we calibrated the lab for silver fiber print, salt print, cyanotype, palladium print.
Once the user has seen at least one product this snippet will be visible.
Recently viewed Products
Nozzle flushing and cleaning kit for Epson 1430 and 1500w printers
You get a set of seven bottles of ink including the photo black (for film), our latest Ultra HD™ Matte Black for Piezography matte printing with dMax up to 1.84, and five additional shades of black ink. It includes
PiezoDN software is included but requires the use of QuadTone RIP and (PrintTool if OS X) which must be purchased separately.
Includes a set of seven refillable cartridges and filling and priming syringes. The seventh cartridge is for alternating black positions for either matte printing or film printing.
Includes a Chip resetter although the chips are auto-resetting. You can use the resetter to reset the chips if you wish to refill before they are empty.
This ink set is designed for the both the Epson 1430 and 1500w printers that use OEM cartridges designated as 79. These are mostly North American and European versions. The inks requires the use of PiezoDN software (which requires Microsoft Excel) and QuadTone RIP. PiezoDN is only compatible with Pictorico ULTRA Premium OHP film. No other film on the market has the capacity to hold as much ink as the PiezoDN ink set produces. Period. Please read our instructions tab.
|Printer Model||Artisan 1430 or Artistan 1400 or Artisan 1500W|
|Product Type||Full Kits (everything)|
|Color Position or Shade||Full Set|
|Ink Brand||Piezography Carbon|
|Gloss or Matte Compatibility||Matte and Digital Negatives Only|
|Piezography Ink Set Configuration||Piezography K6 Set|
|PiezoDN Digital Negative Compatibility||PiezoDN Ready|