What is EasyFill®?
What is EasyFill®? Version 1.0 May 24, 2013 - revise Sept 25, 2018
The new EasyFill® system by Vermont PhotoInkjet is a brand new concept in reusable and refillable inking systems for EPSON desktop printers that use either Claria or Durabrite inks.
EasyFill offers improvements by separating the wet components from the electronic components.
The new system combines easily replaceable ink tanks with chip frames that are inserted into the printer where cartridges are normally installed. The chip frame is semi-permanent (meaning lasts a long time but can be removed) and the chip auto resets when an ink tank runs empty.
Share one ink supply among many printers
The new EasyFill capsule, because it is universal, can be shared amongst any printer using the EasyFill semi-permanent chip frame that fits the ink tank. Sets of chip frames are available for wide ranges of EPSON desktop printers allowing shared ink resources as well as increased productivity by sharing hardware resources. For example, the same 68-77-79 ink capsule fits into EasyFill 77, 79, and 99 keys allowing one source of ink to be shared amongst 18 different printer models.
- 77 Keys fit EPSON Artisan 50 and EPSON Photo R260, R280, R380, RX580, RX595, RX680 printers
- 79 Keys fit EPSON Artisan R1400, 1430 printers (USA models)
- 99 Keys fit EPSON Artisan 700, 710, 725, 730, 800, 800, 810, 835, 837 printers
Ink tanks are easily exchanged. One set of ink tanks will fit the entire range of 77, 79, 99 Claria model printers.
Pre-filled Ink Capsules
Vermont PhotoInkjet is offering pre-filled ink ink tanks with a variety of inks such as an all black dye, or our hybrid UV•45 carbon/dye all black ink. Both of these sets are popular for those who print silkscreen film separations. We are also offering InkThrift CL dye ink that replicates the EPSON Claria ink color space and offers similar fade-resistance. We also provide Private Label inks with minimum order requirements.
Easy to Use
The system is very easy to use. Pre-filled ink tanks are easily inserted into the chip frame. The vent tab is pulled prior to inserting into the printer. When the ink tank is exhausted you replace it with a new one.
When you remove the chip frame from the printer and fit another ink tank into it, the chip on the frame will automatically reset to full when it is reinserted into the printer. There is no need for a chip resetter as long as you allow each tank to exhaust. The printer will tell you when its time to replace a tank. An optional chip resetter is available for those who prefer to reset their chips manually.
Copyright 2018 Vermont PhotoInkjet, LLC All Rights Reserved.